Acqua Brevetti BravoMATIC Série Manuel D'instruction page 39

A2.6 Diagnostics page
The diagnostic page is used to display the correct operation of the filter and to carry out the
filter disinfection procedure.
DIAGNOSTICS PAGE STEPS:
2- Access the diagnostics page
4.1 Manual step mode operation of the gearmotor
4.2 Manual continuous mode operation of the gearmotor
5- Solenoid valves enabling/disabling (Optional)
6- Confirm settings
Hall Sensor:
Pressure Sensor: OFF
Motor:
Solenoid 1:
Solenoid 2:
Mot Ext
1- Access the diagnostics page
Press
2.1- Manual continuous mode operation of the gearmotor
Press
2.2- Manual operation of the continuous geared motor
Press
3- Solenoid valves enabling/disabling (Optional)
Press
3- Confirm settings
Press
If the filter is not in the correct position when exiting the diagnostic page, the gearmotor will start to rotate
until the system reaches the original filtration position.
BravoMATIC - ENGLISH
ON
OFF
OFF
OFF
Rly
MAN139 PAGE E-12
sequentially and hold the pressure for 7 seconds
on the indicated buttons
repeatedly to operate the gearmotor in step
mode
hold the pressure to operate the gearmotor in
continuous mode
to activate the solenoid valve (ON) or deactivate
it (OFF)
to confirm and exit the diagnostic page