Base Camp F235896 Instructions Pour L'utilisateur page 11

AqUACUBE® TAP OPERATING INSTRUCTIONS
1
2
3
4
5
6
OPERATING THE TAP
Step 1.
Press the power button and the unit will switch on and
automatically selects the shower outlet, depress the "OUTLET"
button and the tap icon will illuminate.
Step 2.
Check the "Battery Indicator" that sufficient power is available,
if not connect to the AC or DC adaptor.
Step 3.
Swing the tap away from its storage position and locate towards
the side of the appliance and locate a basin or bucket beneath and
locate the water flow to the central position.
Step 4. Position the gas control in the "max" position, then press
the "Pump" button, water will start to flow within a
few moments.
Step 5. The electronic ignition should be heard igniting the burner,
when lit the "Flame" icon on the display will illuminate and the
outlet water temperature read out will increase.
Step 6.
The water temperature can be adjusted by moving the flow
valve between "min & max" as this will slow or increase
the water flow resulting in an increase or decrease in the
outlet temperature.