ZUCCHETTI Orazio Manuel D'utilisation page 31

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Setting movement speed
Use this function to set the speed at
which the machine advances while clean-
ing. Use lower speed settings for more
thorough cleaning.
1- Press the ENTER key.
2- Press the ARROW keys to scroll
through the menu as required. The
following screen appears:
CHARGING THE BATTERIES THE FIRST TIME
Important
The batteries contain no charge when
the machine is delivered.
The first time you charge the
batteries, charge them for at
least 12 hours with the ma-
chine switched off. After the
first charge, you may then
also charge the batteries with
the machine switched on.
1- Press lightly on the rear of
the cover to open it.
2- Plug the connector
the charging socket and
plug the battery charger
(B)
into the mains supply.
LED
(C)
lights to show that
the batteries are charging.
ORAZIO
Speed
Min. Speed
(A)
to
connector
3- Press the ENTER key again.
4- Press the ARROW keys to increment
or decrement the numbers.
5- Press the ENTER key to confirm your
setting.
This is the last of the programming set-
tings. Remember to disconnect the bat-
tery charger and leave the machine On
in "pause" mode to permit it to start au-
tomatically. The machine will then start
to work as programmed at the pro-
grammed times.
battery charger
(A)
- 13 -
(B)
led
(C)
IDM - 41500600400.tif
User's manual
GB

Publicité

Table des Matières
loading

Table des Matières