ZUCCHETTI Orazio Manuel D'utilisation page 30

Setting the time
1- Press the ENTER key.
2- Press the ARROW keys to scroll
through the menu as required. The
following screen appears:
3- Press the ENTER key again to move
the cursor from hours to minutes.
GB
4- Press the ARROW keys to increment
or decrement the numbers.
5- Press the ENTER key to confirm your
setting.
Setting automatic start times
You can set up to two cleaning cycles
every day to start at different times.
Setting "cleaning cycle 1" start time
1- Press the ENTER key.
2- Press the ARROW keys to scroll
through the menu as required. The
following screen appears:
3- Press the ENTER key again.
4- Press the ARROW keys to increment
or decrement the numbers.
5- Press the ENTER key to confirm your
setting.
Setting "cleaning cycle 2" start time
1- Press the ENTER key.
2- Press the ARROW keys to scroll
through the menu as required. The
following screen appears:
ORAZIO
Time: HH:MM
12:49
Work schedule 1:
20:15
Work schedule 2:
Timer off
3- Press the ENTER key again.
4- Press the ARROW keys to increment
or decrement the numbers.
5- Press the ENTER key to confirm your
setting.
Setting the duration of automatic
cleaning cycles
1- Press the ENTER key.
2- Press the ARROW keys to scroll
through the menu as required. The
following screen appears:
3- Press the ENTER key again.
4- Press the ARROW keys to increment
or decrement the numbers.
5- Press the ENTER key to confirm your
setting.
Setting carpet avoidance percentage
Use this function to set the percentage
of times the machine cleans or avoids
carpets when it detects them. For exam-
ple, if you set a value of 60%, the ma-
chine cleans carpets only 40% of the
times it detects them.
1- Press the ENTER key.
2- Press the ARROW keys to scroll
through the menu as required. The
following screen appears:
3- Press the ENTER key again.
4- Press the ARROW keys to increment
or decrement the numbers.
5- Press the ENTER key to confirm your
setting.
- 12 -
Work time
WorkTime:1h30
Carpets
Clean car. 100%
User's manual