Using The Pc Card Slot; Inserting The Card; Removing The Card - Epson EMP-8300 Guide De Mise En Route

Using the PC Card Slot

You can insert PC cards and wireless LAN cards into the PC card slots
( "Examples of Network Connection Configurations" in the EasyMP.net Operation Guide).

Inserting the Card

Securely insert the PC card into a PC card slot of the projector as far as it will go.
This projector is equipped with two PC card slots.
You can use both slots at the same time by inserting a wireless LAN card into the
top slot and then inserting a memory card into the bottom slot, for example.

Removing the Card

Do not remove a memory card while the card is being accessed (such as
for file operations).
If a memory card is removed while it is being accessed, damage to the
card or loss of the data stored on the card may occur.
To remove a PC card from the PC card slot of the projector, press the eject
button to the left of the slot.
When you press this button once, the button will pop out, and then when you press
it a second time, the card will be ejected. Pull the ejected PC card straight out to
remove it.
Do not leave the eject button in the popped-out position, otherwise it may
become damaged.
13