Epson EMP-8300 Guide De Mise En Route page 43

Hints on How to
Automatic Projection Using the Timer
If the built-in timer of the projector is set, the preset images can be projected
automatically for the preset period. It is also possible to have the projector switch
off automatically after projection has finished.
Projecting Promotional Images in a Store
When one or more images are projected on the "Billboard Vision" screen, automatic
play is useful to change the images after a predetermined period of time. For example,
if plural schedules are set, it is possible to display different image every hour.
It is possible to turn the projector off automatically when the projection has
finished. If the timer is set to the closing hour of the store, the projector is turned off
at this time.
"Automatic Projection by Schedule (Timer Setup)" in the EasyMP.net
Operation Guide
Automatic Projection on an Exhibition Stand
The built-in timer can be set to start projecting automiatcally. No manual operation
is required during startup.
If image files are stored in the projector, they are projected one after the other
according to the timer setup. The same images can be projected continuously in the
endless play mode.
"Automatic Projection by Schedule (Timer Setup)" in the EasyMP.net
Operation Guide
42