AVer CAM550 Mode D'emploi page 9

Making a Video Call
A computer is required to use this device.
1. Open your video collaboration application such as Zoom, Microsoft
Skype, Google Meet, Intel
®
Meeting , TrueConf, Adobe Connect, Cisco WebEx
Vidyo, vMix, WebRTC, Wirecast, XSplit.
2. Set the CAM550 as your primary camera device in your application (Please consult your
application setup guide for details).
3. Ready to make a video call.
[Note] CAM550 is a Plug-n-Play Conference Camera. The system requires no special drivers. For
advanced setting and firmware update, please download PTZApp 2.
Making a Connection through the Browser
CAM550 has an Ethernet port for IP streaming and allows administrators to remotely control and set up
the camera via an internet access. Moreover, CAM550 also supports RTSP and RTMP functions. For
more details, please refer to user's manual or contact our technical support.
1. Make sure the CAM550 has an internet access connection.
2. Launch PTZApp 2* (
3. The camera default IP address is 192.168.1.168. Click pencil icon (
®
Unite™, RingCentral, BlueJeans, V-Cube, LiveOn, CyberLink U
) and connect CAM550 to PC with USB cable
English-7
®
Teams, Skype for Business,
®
, Fuze, GoToMeeting™, Microsoft
.
) to edit IP address**.
®
Lync™,