Remote Control - AVer CAM550 Mode D'emploi

Remote Control

AAA Batteries (required)
*Not supported for CAM550

Preset ( ): The Preset button on the
remote serves 2 functions.
To Save a Preset - Move camera to desired
position. Press and hold the preset button until
you receive the save message on the screen.
Select preset position button 0-9 to store the
current camera position. Repeat steps if
needed.
To Load a Preset - Press the preset button
and preset position button 0-9 to load a saved
camera position. Repeat steps if needed.

Press and hold the number button "
second to turn on or off the WDR function.
[Note] WDR function is suggested to be used
in high contrast background environment to
enhance the dark area. The frame rate will
drop to 30fps or lower. If the light condition is
normal, this function will cause image blur.

Press and hold the number button "
second to turn on or off the SmartFrame
function.

Press and hold the number button "
for 1 second to enable or disable RTMP
streaming function.

Press and hold the number button "
for 1 second to force camera to enter
sleep mode. This will end any video
streaming. To wake up the camera, press
the button or any directional button for 1
second. This mode is not functional while
USB streaming is on.

Camera Select (
remote control can control up to three
AVer USB cameras. To bind cameras,
please use PTZApp 2 or access IP web
page to set it up.If you don't' do any
binding setting, no matter which number
you press, you can control all the AVer
USB camera around you.

SmartFrame
second to switch the SmartFrame
function among Manual Framing/Auto
Framing/ Preset Framing modes.
message (as figures shown) will display
on the screen to indicate the mode while
using HDMI out function.
" for 1
[Note] SmartFrame deploys face and body
detection technology. People wearing
masks and side facial profiles can still be
detected. The maximum detection distance
is 7-10 meters away from the camera.
Set up preset points in advance (Only for
" for 1
Preset point 1-9. Preset 0 is for home
position).
English-5
): One
( ): Press for 1~2
A
"
"