Installing Onto The Boiler; Flame Dimensions - Joannes G50/2 oil Notice D'utilisation Et D'entretien

INSTALLING THE BURNER ONTO THE BOILER
Secure the flange 2 the boiler by no. 4 screws 3 by interposing the insulating gasket 4 and the eventual insulating cord 5.
Insert the burner in the flange so that the nozzle enters the combustion chamber according to the indicators of the boiler
manufacturer. Tighten the screw 1 to block the burner.

FLAME DIMENSIONS

Flame Diameter
Mcal/h
0
200
400
D = 50
600
800
10 20 30 40
flame
test pipeline
1 4
3 2 5
D = 60
50 60 70 80 90 100
The dimensions are indicative. They may be influenced
by:
Excess of air
The shape of the combustion chamber;
Development of smoke turns of the boiler
(direct/overturning);
Pressure in the combustion chamber.
Flame Length
218 M cal
115 cm
40 60 80 100 120 140 160
pag. 65
667 M cal
200 cm
180 200 220 240
cm