Accessories Supplied With The Unit; Installation; Choosing The Location - Eurovent MSW 3 Notice D'installation

2.2 - ACCESSORIES SUPPLIED WITH THE UNIT

Accessory
1 - Support plate
2 - Instructions
3 - Trim
2.3 - WEIGHT
• Net weight : 13.5 kg
• Packed weight : 17.7 kg
2.4 - DIMENSIONS
205

3 - INSTALLATION

3.1 - CHOOSING THE LOCATION

• Select the location for the unit on the basis of the following
criteria:
- The device is intended for installation in sheltered
premises (IP20). Do not install in very damp places or
exposed to projections of water (e.g., laundry rooms).
- Do not install next to electric connections.
- The air intake and blowing grilles must be free from any
obstacle so that blowing can occur correctly in the whole
room.
- The wall on which the air handler will be fixed must be
sufficiently thick for there not to be any resonance and so
as not to produce any noise.
- Provide for the pipes and electric cables.
- It is essential to leave the clear space around the unit (see drawing above).
3.2 - INSTALLATION OF THE SUPPORT PLATE
A - Remove the support panel retaining by
a screw and unhook the panel.
B - Tube outlet orientation.
CAUTION : Do not use orientations
3 or 4 for devices equipped with
water condensate pump.
C - Use the support plate as a jig to locate
the rear outlets.
D - Mount the plate on the wall using the
supplied screws and dowels.
To avoid vibrations, ensure that the
panel is mounted securely against the
wall.
ty
Q Use
1 Wall support for the internal
unit.
2 1 Installation instructions.
1 Operating instructions.
1 Finger plate for the hole in
the wall.
1000
A
Support plate
B
1
Accessory
4 - Dowels
5 - Large screws
6 - Insulation
150
C
Cover
D
2 5
4
3
ty
Q Use
6 For fixing the support plate.
6 For fixing the support plate
with the dowels.
1 Insulation connections.
250
1400
Front view
130
Ø 40
220 Ø 70 Ø 70 145
NO YES NO
F
GB
I
E
D
3