Tips On Cooking And Frying; Cookware For Induction Cooking Zones - AEG ELECTROLUX 88032K-MN Notice D'utilisation

Control panel
• When the appliance is switched off, if one or more of the sensor fields on the control
panel are covered for more than 10 seconds, an acoustic signal sounds. The acoustic
signal switches itself off automatically when the sensor fields are no longer covered.
Induction cooking zones
• In the case of overheating (e.g. when a saucepan boils dry) the cooking zone automat-
ically switches itself off.
be set to
• If cookware that is not suitable is used,
the display for the cooking zone switches itself off.
• If one of the cooking zones is not switched off after a certain time, or if the heat setting
is not modified, the relevant cooking zone switches off automatically.
Before being used again, the cooking zone must be set to

Tips on cooking and frying

Information about acrylamides
According to the latest scientific research, intensive browning of food, especially in products
containing starch, may present a health risk due to acrylamide. Therefore we recommend
cooking at low temperatures and not browning foods too much.

Cookware for induction cooking zones

Steel, enamelled steel
Cast iron
Stainless steel
Cookware bottom of multilayer
Aluminium, copper, brass
Glass, ceramic, porcelain
* Cookware for induction cooking zones is labelled as suitable by the manufacturer.
Suitability test
Cookware is suitable for induction cooking, if ...
• ... a little water on an induction cooking zone set to the highest heat setting is heated
within a short time.
• ... a magnet sticks to the bottom of the cookware.
is displayed. Before being used again the cooking zone must
and allowed to cool.
Heat setting
1 - 3
4 - 7
8 - 9
10 - 14
Cookware material
Tips on cooking and frying
lights up in the display and after 2 minutes
.
Switches off after
6 hours
5 hours
4 hours
1.5 hours
Suitable
31
is displayed.
+
+
+*
+*
-
-