Products And Supplied Accessories - Sharp AQUOS AN-65AG1 Mode D'emploi

Products and supplied accessories

Base bracket: 1
For fastening the
wall-mount bracket
M6 length:
8mm (2 screws)
*The screw notation M6 means the diameter of the threaded part is 6 mm.
*Please also store the screws that are not used.
Please use the following
• Wall installation screws (off-the-shelf) 17 pieces.
Be sure to consult the dealership or a qualified contractor when installing the TV.
• Stand hole covers × 2 (Included with the Liquid Crystal Television)
• A plumb bob
• Cellophane tape, etc.
• Cushion, soft cloth, etc.
• Tool (Phillips head screwdriver)
Installation location
• Liquid Crystal Televisions have a viewing angle (range in which the image can be viewed
correctly). The best viewing position is from directly in front of the screen. Determine the TV
installation location after taking into consideration the viewing posture, line of sight, and the
visual and aural ranges.
• Sharp shall bear no responsibility for damages, etc., caused by the Liquid Crystal Television
Caution
falling due to insufficient installation strength or improper installation.
Weight table
(Unit: kg) ⁄ Ibs.
Destination Appropriate
market Model
Japan LC-65GE1
USA LC-65D90U
Japan LC-57GE2
Wall-mount bracket: 1
Screws
For the angle setup
bracket
M8 length:
15mm (2 screws)
Model unit
Fixture
(no stand)
Approx. 69 Approx. 10.5 Approx. 79.5
Approx. 69.5 Approx. 10.5
(186.5 Ibs) (28.5 Ibs)
Approx. 68 Approx. 10.5 Approx. 78.5
*Assembly completed for
vertical installation.
For installing the wall-
mount bracket unit
M10 length:
30mm (4 screws) with
hexagonal sockets
Total Weight
Approx. 80.0
(215 Ibs)
Angle setup bracket: 2
Allen wrench: 1
Operation manual
(This manual)
E-3