Drain System Requirements - Haier HLTW500AXW Guide De L'utilisateur

WasHER DIMEnsIons
aLCovE oR CLosET REqUIREMEnTs
MInIMUM CLEaRanCEs
•
Dimensions shown are the recommended minimum clearance allowances.
•
Space on the sides of the washer is required to avoid noise transfer.
•
Space at the rear of the washer is necessary for water inlet hoses.

DRaIn sYsTEM REqUIREMEnTs

WaLL oR fLooR sTanDPIPE
The height of the standpipe must be between 39" (99 cm) and 60" (153 cm) from the
bottom of the washer. The minimum diameter of the standpipe must be 2" ( 5 cm).
Wall
6
42½ "
(108.0 cm)
27 "
(68.6 cm)
1"
(2.5 cm)
60 in.
2
(387.1 cm )
2
60 in.
2
(387.1 cm )
2
floor
(99 cm – 153 cm)
27 "
(68.6 cm)
1"
15"
(2.5 cm)
(38.1 cm)
39 " – 60 "
7³⁄₄"
(20 cm)