Yamaha NX-B55 Mode D'emploi page 11

Playback via connection
On
Auto Connection
This unit and the other device are connected automatically if the device is the latest recently connected one
and ready to connect.
Notes
• Auto Connection may not be available depending on the other device.
• Operate the other device to establish Bluetooth connection if Auto Connection is not available.
PLAY
connection for playing music
a Press p (power) to turn on this unit.
b Operate the paired other device to establish the
Bluetooth connection.
The status indicator lights up in blue when
Bluetooth connection is completed.
c Start playback of the other device.
d Adjust the volume level using the VOL (volume)
control of this unit.
Some devices can be connected automatically while
pairing. In that case, you can omit step a and b.
Disconnecting
The Bluetooth connection will be disconnected
by performing either of the steps below,
or .
Press p (power) to turn off this unit.
Set the Bluetooth function of other device to off.
6
En