Outdoor Sensor; Side View; Bottom View; Power Supply - Alecto WS-5300 Guide De L'utilisateur

1.2

Outdoor sensor:

57

side view

57. rain meter
58. antenna
59. wind speed meter
60. temperature + humidity sensor
2. INSTALLATION
Attention: after the installation, it may take several hours up to a day before the correct values are
displayed.
2.1

Power supply:

Advice regarding batteries:
A CR-2032 button cell is located inside the weather station (included). When the empty battery icon (2)
illuminates, this button cell must be replaced by an equivalent battery type.
Also the outdoor sensor is powered by 3 x AA 1.5V batteries, but because normal Alkaline batteries perform
poorly or not at all at temperatures of around or below 0°C, it's not recommended to use standard Alkaline
batteries for the outdoor sensor.
For that reason, we advise you to use Lithium batteries for the outdoor sensor that are designed to
function well within a temperature range of -20°C to 60°C. These batteries can be ordered via the service
department of Alecto (www.alecto.nl).
Lithium batteries with a capacity of 2900mAh have a lifespan of over one year.
58 59
60
61
62
63
64
61. wind direction vane
62. LED (transmitting indicator)
63. RESET button
64. battery compartment
47
bottom view