Radio Reception - Yamaha PIANOCRAFT CRX-E320 Mode D'emploi

Radio reception

FM/AM
Problem
The preset selecting
function (see page 26) does
not work.
The preset station settings
have been cleared.
FM
Problem
Too much noise during
stereo broadcast.
Even with an outdoor
antenna, radio wave
reception is weak. (Sound is
distorted.)
The auto tuning function
(see page 24) does not
work.
AM
Problem
Too much noise during
broadcast.
The auto tuning function
(see page 24) does not
work.
Cause
The preset (memory) may have been
erased.
The power to this unit may have been
lost more than a week.
Cause
The FM antenna may be connected
improperly.
The radio station you selected may
be far from your area, or the radio
wave reception is weak in your area.
Multipath reflection or other radio
interferences may have occurred.
The radio station you selected may
be far from your area, or the radio
wave reception is weak in your area.
Cause
The noise may be caused by
atmospheric electricity, lightning,
fluorescent lights, motors, or
thermostat electric devices.
If this unit is placed near a TV, the
noise may be generated especially in
the evening.
The AM loop antenna may be
connected improperly.
The radio station you selected may
be far from your area, or the radio
wave reception is weak in your area.
Troubleshooting
Solution
Preset radio stations again (see
page 25).
Plug the power cable into the outlet
firmly, and preset the stations again (see
page 25).
Solution
Make sure the FM antenna is connected
properly (see page 11).
Try manual tuning to improve the
signal quality (see page 24) or use
a multi-channel outdoor antenna.
Change the height, direction, or
placement of the antenna.
Try manual tuning to improve the
signal quality (see page 24) or use
a multi-channel outdoor antenna.
Solution
Connect an outdoor antenna and
establish a better grounding to decrease
the noise. However, it is difficult to
eliminate these types of noise.
Place this unit away from a TV.
Make sure the AM loop antenna is
connected properly (see page 11).
Try manual tuning to increase the signal
quality (see page 24).
37
En