HEINE E7 Manuel D'utilisation page 8

Use this power supply only for the supply of the devices it is intended for.
Do not use the device in hyperbaric chambers, in explosive or oxygen loaded environments!
To put the device into service, first connect the cord to the load, and then plug the power supply into the
socket. When taking the instrument out of service, proceed in reverse order.
The device must not come into contact with liquids.
The performance and safety of the device can only be guaranteed when fitted with original HEINE
accessories and HEINE spare parts. Otherwise the warranty is terminated.
A modification of the power supply is not allowed (Loss of warranty).
Explanation of utilized symbols
The following symbols are used on the device or on the packaging:
The CE marking indicates that the product conforms to the specifi-
cations of Directive 93/42/EEC concerning medical devices.
REF Catalogue number
SN Serial number
Manufacturer
Date of manufacture
Product bearing this symbol may not be disposed of together with
general household waste, but instead requires separate disposal.
Temperature limits in °C for storage and transport
Temperature limits in °F for storage and transport
Humidity limitation for storage and transport
Pressure limits for storage and transport
Protection Class II
For indoor use only
UL approval mark. Valid in the USA and Canada
ENEC European mark of conformity
Please read and follow the instructions for use and keep them for
future reference (Background: blue; Foreground: white)
Keep dry!
"Grüner Punkt" (country-specific)
8