Maintenance / Cleaning; Technical Specifications; Electrical Connection - Vortice Pre-Heating Box VORT PROMETEO HR 400 Notice D'emploi Et D'entretien

ENGLISH
Overheating
If the appliance overheats and the safety thermostat
strips, it can be reset manually. Switch off mains
power before removing the cover from the
connections box. This operation must only be
performed by authorised personnel

Maintenance / Cleaning

• This appliance does not require any special
maintenance except periodic checks for correct
functioning.
• Switch off mains power before performing any
maintenance. At least once a year inspect the
heating elements and remove any build-ups of dust
and dirt.
• Do not use solvents, and take care not to damage
delicate electrical components when performing
cleaning.
Tecnical Specifications
1 2 3 4 5 6 7 8 9 10
1,2 1 1x1,2 1/1 5,2 64 230 50 40
Ø D A B
150 150 285
(Fig. 3,3a)
3 3
10
C E F Kg
40 380 250 2,2
A
D
Ø
3a 3a
C
1
Electrical Power Kw
2
Nr.of Phases
3
Nr. Electrical Heater
4
Nr. of Sections
5
Current: A
6
Air Flow Rate Min.: m
7
Tension: V
8
Frequency: Hz
9
Protection IP
10
Insulation

Electrical Connection

4 4
E
B
C
3
/h