Detergents And Additives; Technical Specifications; Installation - Electrolux EWB 105405 W Notice D'utilisation

Masquer les pouces Voir aussi pour EWB 105405 W:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10 electrolux
Problems
The
error code
appears in the dis-
1)
play
and the "Start/
Pause" button flashes
2)
red
:
The
error code ap-
1)
pears in the display
and the "Start/Pause"
2)
button flashes red
:
The
error code
appears in the display
and the "Start/Pause"
2)
button flashes red
:
The drainage pump runs
constantly, even when
the appliance is inac-
tive :
Softener runs directly in-
to the drum when filling
the dispenser box:
1) On some models, the audible signals can sound
2) After solving any problems, press "Start/Pause" button to restart the interrupted programme.

DETERGENTS AND ADDITIVES

Only use detergents and additives designed
for use in a washing machine. We do not
recommend mixing different types of deter-
gents. This may spoil the washing. There
are no restrictions on the use of powder de-
tergents. Liquid detergents must not be
used when a prewash or the reference pro-

TECHNICAL SPECIFICATIONS

DIMENSIONS
LINE VOLTAGE /FREQUENCY
POWER CONSUMPTION
WATER PRESSURE
Connection to water supply

INSTALLATION

Remove all protective packaging for transit
before using for the first time. Keep in case
needed for future transit: Transporting a
• the object trap is obstructed,
• the drain hose is blocked or bent,
• the drain hose is fixed to high (see "Installation" section),
• the drainage pump is blocked,
• the standpipes blocked.
• the water tap is closed,
• the water supply has been cut off.
• the drainage filter is obstructed,
• the anti-flooding security system has been activated, please proceed
1)
as follows :
- close the water inlet tap,
- empty the appliance for 2 minutes before unplugging,
- call the after-sales service.
• the anti-flooding security system has been activated, please proceed
as follows :
- close the water inlet tap,
- empty the appliance for 2 minutes before unplugging,
- call the after-sales service.
• you have gone past the MAX indicator.
Height
Width
Depth
Minimum
Maximum
Causes
gramme (see Programmes table) has been
selected. For cycles without prewash, they
must be added via means of a dosing ball.
Detergent tablets or doses must be placed
in the detergent compartment of your appli-
ance's dispenser box.
850 mm
400 mm
600 mm
230 V / 50 Hz
2300 W
0,05 MPa (0,5 bar)
0,8 MPa (8 bar)
Type 20/27
non-secured appliance may damage inter-
nal components and cause leakages and

Publicité

Chapitres

Table des Matières
loading

Table des Matières