Depaepe Telecom HD 2000 URGENCE Notice D'utilisation page 27

Desk mount installation (Optional) see page 28
Use the optional desk-mount kit including one securing
screw, a loaded desk mount base, 2 desk-mount black
latches and the 4 non slip pads.
1- Take off the 2 screws located on the base of the unit.
2- Pull of the 2 wall-mount black latches and replace
them by 2 smaller desk-mount black latches.
3- Replace the 2 fixing screws.
4- Connect the handset cord.
5- Insert the desk-mount base.
6- Fix the base inserting the securing screw through the
top side of the telephone.
7-Connect the line cord to the line cord connector in
the bottom of the telephone (See page 26).
8-Place the non slip pads.
27