Pc Input Typical Display Modes - Durabase DL32F249S4CW-W Mode D'emploi

Table des Matières

Les langues disponibles

No sound

Remote control - no operation

Input sources - can not be selected

Recording unavailable

USB is too slow

• Is the antenna cable damaged?

• Are suitable plugs used to connect the antenna?

• If you are in doubt, consult your dealer.

• Check if the TV is muted. Press the Mute button or

increase the volume to check.

• Sound may be coming from only one speaker. Check

the balance settings from Sound menu.

• The batteries may be exhausted. Replace the

batteries.

• If you cannot select an input source, it is possible

that no device is connected. If not;

• Check the AV cables and connections if you are

trying to switch to the input source dedicated to the

connected device.

then switch on the TV to enable recording feature. If

re-inserting the USB device.

If a "USB disk writing speed too slow to record"

message is displayed on the screen while starting a

recording, try restarting the recording. If you still get

the same error, it is possible that your USB disk does

not meet the speed requirements. Try connecting

another USB disk.

To record a programme, you should first connect a USB

disk to your TV while the TV is switched off. You should

you cannot record, try switching off the TV and then