Power Levels - Rocky Mountain POWERPLAY Mode D'emploi

15
Powerplay Owner's Manual
Riding the bike
Warning
Make sure the brakes are applied before putting any pressure on the pedals, or even
resting your foot on the pedals. The Powerplay Drive uses a sophisticated torque
sensing circuit to deliver smooth, instant, natural feeling power. This circuit is very
sensitive, so care must be taken to not have the bike accelerate away from the rider
when stopped.
Power ON
To power up the Powerplay Drive, use the iWoc remote: click button (B).
Note: the Powerplay Drive will always power up to the lowest Power Level. The rider
can then increase the Power Level using the iWoc remote

Power levels

The Powerplay Drive provides several levels of power assistance:
Level 1: Eco
This is the lowest power setting, used for maximum battery life and rider input
Level 2: Trail
This medium assist level balances assistance and battery life for all around trail riding
Level 3: Ludicrous
For maximum speed and assistance, this level delivers a huge amount of power to the
rear wheel. Note that prolonged use of Ludicrous Mode will discharge the battery at a
relatively rapid rate
To change assist levels, use the iWoc remote: press button (C) to increase assist, or
button (A) to decrease assist.
NOTE: WITH THE HELP OF THE OPTIONAL EBIKEMOTION MOBILE APP THE RIDER
CAN CUSTOMIZE THESE POWER LEVELS. THIS IS FOUND IN THE SETTINGS MENU.