Possible Misuse; Service Indicator; Technical Data - Hilti TE 500-AVR Mode D'emploi

3.4

Possible misuse

• This product is not suitable for working on hazardous materials.
• This product is not suitable for working in a damp environment.
• This product may not be connected to a power source providing a voltage and frequency not in
compliance with the information given on the type identification plate.
3.5

Service indicator

The breaker is equipped with a service indicator LED.
Status
The service indicator lights.
The service indicator blinks.
3.6 Items supplied
Breaker, side handle, operating instructions.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.group.
4

Technical data

4.1 Breaker
For details of the rated voltage, frequency, current and input power, please refer to the power tool's
country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer's power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be within +5% and -15% of the rated voltage of the power tool.
Weight in accordance with EPTA procedure 01
4.2 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one power tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: Maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values
Sound (power) level (L
Uncertainty for the sound power level (K
Sound pressure level (L
Uncertainty for the sound pressure level (K
*2146159*
Printed: 12.11.2018 | Doc-Nr: PUB / 5367061 / 000 / 04
)
WA
)
WA
)
pA
)
pA
2146159
Meaning
End of service interval – servicing is due.
The product is faulty. Have the product repaired by
Hilti Service.
TE 500­AVR
6.3 kg
TE 500­AVR
95 dB(A)
3 dB(A)
84 dB(A)
3 dB(A)
English 5