Display - Kenwood Nexedge Serie Mode D'emploi

k
key
Press to activate its programmable function {page 7}. The default setting is
Zone Down.
l
key
Press to activate its programmable function {page 7}. The default setting is
Zone Up.
m
key
Press to activate its programmable function {page 7}. The default setting is
None (no function).
n Speaker
Internal speaker
o PTT (Push-to-Talk) switch
Press and hold this switch then, speak into the microphone to call a station.

DISPLAY

Indicator
Appears when the Monitor or Squelch Off function is activated.
Blinks when signaling of an incoming call matches the Optional
Signaling set up on your transceiver.
Appears when the current zone (left icon) or CH/GID (right icon)
is added to the scanning sequence.
Appears when you are using Scan mode. Blinks while paused
at a channel.
Appears when there is a message stored in the transceiver
memory. Blinks when a new message has arrived.
Appears when the current channel is programmed as a Priority
channel. " " represents Priority channel 1. " "
represents Priority channel 2. " " represents Priority channels
1 and 2.
Appears when the Operator Selectable Tone (OST) function is
activated.
Appears when the selected group is programmed as telephone
IDs. Blinks during Auto Telephone search.
Appears when the Talk Around function is activated.
Appears when the Site Lock function is activated.
Description
5