Applications; Operating Elements - Monacor PA-1200C Notice De Montage Et D'utilisation

Masquer les pouces Voir aussi pour PA-1200C:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Timer Insertion
These instructions are intended for technicians
installing the module and for users without any
specific technical knowledge . Please read the in-
structions carefully prior to operation and keep them
for later reference .

1 Applications

This module is suited for installation into MONACOR
PA amplifiers with insertion compartment for mod-
ules and into MONACOR extensions, for example:
PA-1120
PA-1240
PA-1200
PA-1200EX
PA-5240
PA-5480
PA-6240
PA-6480
PA-6600
Contents

2 Operating Elements

3 Safety Notes
5 2 5 Menu item
PA amplifier for 5 zones
PA amplifier for 4 zones
Extension for 2 modules
PA amplifier for 5 zones
PA amplifier for 6 zones
2 Operating Elements
1 Multifunctional display
a time
b status indication:
= timer activated
ON
= timer deactivated; no program step is
OFF
carried out
c indicates the activated relays
d date: day / month / year
e weekday: 1 = Monday, 7 = Sunday
2 Button CHIME A / UP
in the standard mode: trigger one-sound chime
in the programming mode: increase selected value
or go to the next menu item
3 Button CHIME B / DOWN
in the standard mode: trigger two-sound chime
in the programming mode: decrease selected
value or go to the previous menu item
4 Button CHIME C / ENTER
in the standard mode: trigger three-sound chime
in the programming mode: confirm selected value
5 Button PROG to switch on the programming
mode: keep the button pressed for approx . 3 sec-
onds; in the programming mode, the button is
without function
6 Volume control LEVEL (mixing control)
11
11
3 Safety Notes
11
The insertion corresponds to all relevant directives
of the EU and is therefore marked with
12
The insertion must only be installed by skilled
13
personnel .
13
The insertion is suitable for indoor use only . Pro-
tect it against dripping water and splash water,
high air humidity, and heat (admissible ambient
13
temperature range 0 - 40 °C) .
Do not set the unit with the installed insertion
13
into operation, and immediately disconnect the
mains plug from the mains socket if
15
1 . there is visible damage to the insertion, to the
unit, or to the mains cable,
2 . a defect might have occurred after a drop or
16
similar accident,
3 . there are malfunctions .
16
In any case the insertion or the unit must be
repaired by skilled personnel .
For cleaning only use a dry, soft cloth; never use
chemicals or water .
17
No guarantee claims for the insertion and no
17
liability for any resulting personal damage or
17
material damage will be accepted if the insertion is
.
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

17.1160

Table des Matières