Table des Matières
Publicité
INSP
ADJ
GENERAL
Lubrication points
1. Lubricate:
Throttle cable (handlebar end)
Recommended lubricant:
Rust inhibitor
NOTE:
Before
lubricating
squeeze the throttle lever and remove the
rubber seal 1.
2. Lubricate:
QSTS control cables (handlebar end)
Recommended lubricant:
Yamaha marine grease,
Yamaha grease A
(Water resistant grease)
NOTE:
Before lubricating the QSTS control cables,
remove the QSTS cable housing cover.
Spray the rust inhibitor into the outer
cables, and apply grease to the inner
cables.
3-16
E
the
throttle
cable,
Publicité
Chapitres
Table des Matières
