Oil Injection System; Oil Line Inspection; Power Unit; Spark Plug Inspection - Yamaha WaveRunner XLT1200 Manuel D'entretien

Masquer les pouces Voir aussi pour WaveRunner XLT1200:
Table des Matières

Publicité

INSP
ADJ
OIL INJECTION SYSTEM/POWER UNIT

OIL INJECTION SYSTEM

Oil line inspection

1. Inspect:
Oil filter
Contaminants → Clean.
Frays/tears → Replace.
Rubber seal
Cracks/wear → Replace.
Oil hoses
Oil tank
Oil filler cap
Cracks/damage → Replace.
Check valve
Malfunction → Replace.
CAUTION:
Do not allow the oil tank to become com-
pletely empty. If the oil tank becomes
empty the oil injection pump must be bled
to ensure proper oil flow, otherwise engine
damage may occur. Refer to "OIL PUMP" in
Chapter 4.

POWER UNIT

Spark plug inspection

1. Inspect:
Electrodes 1
Damage/wear → Replace.
Insulator color 2
Distinctly different color → Check the
engine condition.
Color guide:
Medium to light tan color:
Normal
Whitish color:
Lean fuel mixture
Air leak
Incorrect settings
Blackish color:
Overly rich mixture
Electrical malfunction
Excessive oil use
Defective spark plug
2. Clean:
Spark plug
(with a spark plug cleaner or wire
brush)
3-10
E

Publicité

Chapitres

Table des Matières
loading

Table des Matières