Publicité
TECHNICAL DATA
Mitresaw*
Production code
Rated input
No-load speed
Saw blade dia. x hole dia
Saw blade thickness
Max. cutting capacity
Mitre 0°/ Bevel 0°
Mitre 45°/ Bevel 0°
Mitre 0°/ Bevel 45°
Mitre 45°/ Bevel 45°
Min. workpiece dimensions
Weight according EPTA-Procedure 01/2003
Noise/Vibration Information
EN
Measured values determined according to EN 61029.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K=3dB(A))
Sound power level (K=3dB(A))
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined according to
EN 61029.
Vibration emission value a
Sawing of wood
Uncertainty K=
*PS
Mitresaw
^
=
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications,
with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING!
Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Wear ear protectors. Exposure to noise can cause hearing loss.
Always wear goggles when using the machine. It is recommended
to wear gloves, sturdy non slipping shoes and apron.
The dust produced when using this tool may be harmful to health.
English
20
h
PS 216 L
4406 51 01...
4406 61 01...
... 000001-999999
220-240 V, 50 HZ, S6(40%),
1500 W, 6,5 A
5000 min
-1
216 x 30 mm
1,6 mm
65 x 305 mm
65 x 215 mm
36 x 305 mm
36 x 215 mm
130 x 35 x 2,5 mm
16,5 kg
99,2 dB (A)
112,2 dB (A)
3,5 m/s
2
1,5 m/s
2
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Appliances used at many different locations including open air
should be connected via a residual current device (FI, RCD, PRCD) of
30mA or less.
Before doing any work on the machine, pull the plug out of the
socket.
Only plug-in when machine is switched off.
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
PS 254 L
4406 71 01...
4406 81 01...
... 000001-999999
220-240 V, 50 HZ, S6(40%),
2000 W, 8,3 A
4500 min
-1
254 x 30 mm
1,8 mm
90 x 305 mm
90 x 215 mm
50 x 305 mm
50x 215 mm
130 x 35 x 2,5 mm
19,5 kg
97,3 dB (A)
110,3 dB (A)
2,4 m/s
2
1,5 m/s
2
Publicité
