Installation; Unpacking; Locating - Adam Equipment WBW Série Manuel

3.0 INSTALLATION

3.1

UNPACKING

Remove the scale from the packing carefully. Inside the box you will find
everything needed to start using the scale-
3.2

LOCATING

© Adam Equipment Company 2014
Pre-assembled scale
Stainless steel top pan
Power Supply Module
Operators Manual
•
The scales should not be placed in a location
that will reduce the accuracy.
•
Avoid extremes of temperature. Do not place
in direct sunlight or near air conditioning
vents.
•
Avoid unsuitable tables. The table or floor
must be rigid and not vibrate.
•
Avoid unstable power sources. Do not use
near large users of electricity such as welding
equipment or large motors.
•
Do not place near vibrating machinery.
•
Avoid air movement such as from fans or
opening doors. Do not place near open
windows or air-conditioning vents.
•
Keep the scales clean. Do not stack material
on the scales when they are not in use.
6