IARP EIS 104 TI Instructions D'emploi Et D'entretien page 12

DOOR REGULATION
This unit is equipped with sliding doors.
The levelling operation is very important: a bad levelling can cause a fold of the door frames when
the loading operation is finished. The cabinet must be installed on an even surface; it is necessary to
settle the sliding doors so that they will be parallel. In order to do this you can adjust the wheel (A-B).
A
2
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2002/96/EC
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a
dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for
the environment and health deriving from inappropriate disposal and enables the constituent
materials to be recovered to obtain significant savings in energy and resources. As a remin-
der of the need to dispose of household appliances separately, the product is marked with a
crossed-out wheeled dustbin.
B
3
REAR HANDLES MOUNTING
In order to obtein a right working of the cabinet, it's
necessary to mount on the rear side two handles A fixed
by screws B 5.5x16 TEFR.
The handles can be use either to move the cabinet or
as spacer from the wall.
4
-12-
1