WMF LINEO Mode D'emploi page 18

Troubleshooting
The following tips should help you to solve any problems. If the problem persists,
please contact our central customer service department. Please note the warranty
information.
Problem
The control lamp is not
illuminated, the appli-
ance does not start
Milk is leaking from
the lid
18
Possible cause
The plug is not plugged
in.
Overheating protection
active
Too much milk in the
appliance
The lid is not fitted
properly
The sealing ring is miss-
ing or is dirty
Action
Connect the plug
Allow the appliance to
cool
Pour out some of the
milk
Gently push the lid down
Clean and insert the
sealing ring