WMF LINEO Mode D'emploi page 16

Cold milk froth
Select this program for cold, creamy milk froth. This is ideal for frappés, cocktails,
iced coffee or deserts.
▪ Fill the jug (4) with 100 to 150ml of cold milk.
The jug (4) is marked with the following measures:
100 ml MIN
150 ml MAX
DO NOT overfill the jug, otherwise the milk froth will overflow and spill over
the appliance.
▪ Place the lid (1) on the jug (4) and push down gently to seal.
▪ Now press the start/stop button (5) repeatedly until the lamp for the
symbol illuminates. After approximately 3 seconds, the appliance starts
automatically, the control lamp for the start/stop button (5) is illuminated.
▪ After the program has finished, the appliance automatically switches itself off,
the control lamp is no longer illuminated. Lift the lid (1) and skim off the milk
froth separately or pour it out with the rest of the milk.
Hot milk
Select this program to heat and lightly froth the milk. The hot milk is ideal for
milky coffee, hot chocolate or cocoa.
▪ Fill the jug (4) with 100 to 250 ml of cold milk.
The jug (4) is marked with the following measures:
100 ml MIN
250 ml MAX
DO NOT overfill the jug, otherwise the milk froth will overflow and spill over
the appliance.
▪ Place the lid (1) on the jug (4) and push down gently to seal.
▪ Now press the start/stop button (5) repeatedly until the lamp for the
symbol illuminates. After approximately 3 seconds, the appliance starts
automatically, the control lamp for the start/stop button (5) is illuminated.
▪ After the program has finished, the appliance automatically switches itself off,
the control lamp is no longer illuminated. Lift the lid (1) and pour the milk.
16