Graf AQUA-CENTER SILENTIO 15/4 Notice D'installation Et D'entretien page 14

Installation instructions and maintenance for the GRAF
SILENTIO drinking water feeding module
SILENTIO 15/4
Order Nr. 350209
SILENTIO 25/4
Order Nr. 350210
SILENTIO 15/4
with charging pump
Order Nr. 350211
SILENTIO 25/4
with charging pump
Order Nr. 350212
The points described in these
instructions must be followed
correctly. If not correctly ob-served,
any right to claim on the guarantee
may be re-fused. For all additional
GRAF articles purchased there are
separate installation instructions
enclosed in the transportation
packing.
Any missing instructions must be
requested directly from us.
A complete check of all the
items/components for possible
damage must be carried out before
the assembly or installation begins.
The installation must be carried out in
a professional manner.
info@graf-online.de
www.graf-online.de
Table of contents
1. GENERAL NOTES
1.1 Safety
1.2 Identification obligation
2. APPLICATION
3. TECHNICAL DATA
3.1 Dimensions and weight
3.2 System control
3.3 Float valve
3.4 3 way switch-over valve
3.5 Pressure and flow rate sensor „Controlmatic"
3.6 Pump
4. INSTALLATION AND ASSEMBLY
4.1 Wall assembly
4.2 Emergency overflow connection
4.3 Drinking water connection
4.4 Suction pipe connection
4.5 Pressure hose connection
4.6 Data cable and sensor connection
4.7 Connection of the Opticlean additional pump and
solenoid valve (optional)
5. COMMISSIONING
6. SERVICE AND CARE
6.1 Service
6.2 Care
7. FAULT FINDING AND CORRECTIVE ACTION
page 12 of 44
13
13
13
13
14
14
15
15
15
15
15
17
17
18
18
19
19
20
20
20
21
21
21
22