Operation Voltage; Water Connections - conatex GFL Water Stills 2002 Notice D'utilisation

5. Operation Voltage

The Water Still must be connected to the mains supply either by a correctly
installed shock-proof socket, or, with a fixed connection, to an on- site main
switch. The Water Still is a protection class I electrical appliance, a
connection to the earth conductor (PE) must be ensured. For information
on the required mains fuse please view Technical Data, chapter 11 of this
manual.
The electrical connection must ensure an all- pole separation from the
mains at any time. Shock- proof sockets or main switches to separate the
Water Still from the mains must be installed in such a way as to ensure
they can be clearly identified and are easily accessible at any time.
The mains connection cable must not touch any hot surfaces of
the unit. It may not lead underneath the unit.
The main switch (I) of the Water Still must be off (position O). The
voltage on the nameplate (at the left-hand side of the unit) must be
identical to the mains voltage. If they are identical, connect the
unit to the mains.
Please also refer to chapter 13 of these operating instructions
"Connection to the Mains".

6. Water Connections

All water connections of the Water Still, except the distillate withdrawal tap on the front, are
situated on the right-hand side of the unit.
Hoses for water inlet and outlet are not included in the standard scope of supply.
6.1 Distillate withdrawal ①
Distillate is withdrawn from the unit through the black plastic tap on the front of the unit. It can be
opened in continuous or interval positions. A laboratory hose with an inner diameter of approx.
15 mm can be connected to the tap, the hose has to be secured from slipping off with a hose
clip.
6.2 Drain boiler ②
Connect a ½" hose to drain the boiler when cleaning the unit and/or carrying out maintenance
works.
© Tous droits réservés –
Caution, distilled water leaves the Water Still
with a temperature of more than 50°C.
Danger of scaldings!
Caution, the water leaves the boiler of the Water Still
with a temperature of up to 100°C.
Danger of scaldings!
France : web: www.conatex.fr – Email: info@conatex.fr
Suisse : web : www.conatex.com – Email : info@conatex.com
Notice d'utilisation
Distillateur 116.3050
14