Philips RESPIRONICS InnoSpire Mini Mode D'emploi page 3

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

InnoSpire Mini
InnoSpire Mini compressor
(back view)
Air outlet
ON/OFF switch
AC power
adapter
(100-240v)
Filter cap
Air filters – 4 pcs.
SideStream Plus
nebulizer
4
Neb holder
(front view)
Filter holder
Compressor
AC power plug-in
12V DC (car) adapter
Rechargeable lithium
ion battery pack
Tubing
Carrying case
Read these instructions before using this compressor. If you do not understand any portion of
these instructions, contact your healthcare provider or call Philips Respironics Customer Service
at 1-800-345-6443 or 1-724-387-4000.
Intended use statement
The Innospire Mini is intended to provide a source of compressed air for medical purposes. It is
to be used with a pneumatic (jet) nebulizer to produce aerosol particles of medication for
respiratory therapy for both children and adults.
Unpacking your InnoSpire Mini system
When you unpack your InnoSpire Mini from its shipping case:
Carefully examine the contents against items listed and for damage. Make sure you have all the
content items listed and that they are not damaged.
Save these Instructions for use for reference.
Report anything missing or damaged to Philips Respironics.
Note: Retain carton and packing materials for storing the unit or for product returns.
Read these warnings and cautions before using your
InnoSpire Mini
Warnings and cautions
It is recommended to have a backup device (e.g. MDI) for respiratory delivery in case a situation
arises when your nebulizer cannot be used (e.g. during a power outage or if your compressor
and/or battery becomes inoperable for any reason).
DANGER – To reduce the risk of electrocution:
Always unplug this compressor immediately after using.
Do not place or store product where it can fall or be pulled into a tub or sink.
Do not place in or drop into water or other liquid.
Do not reach for product that has fallen into water. Unplug immediately.
Electromagnetic information: Portable and RF communication devices such as cellular phones,
pagers, etc. can interrupt operation of electrical medical equipment. For this reason, your
compressor must be placed far enough away from these devices to prevent interference. This
device meets the IEC60601-1-2 Standard for Electromagnetic Compatibility (EMC). EMC data
sheets are available upon request from Philips Respironics Customer Service at 1-800-345-6443
or 1-724-387-4000. The CE mark on the product denotes compliance with all applicable EU
ENGLISH
5

Publicité

Table des Matières
loading

Table des Matières