Receipt; Construction Characteristics; Component Identification - Ferroli EGEA 90 LT Manuel D'utilisation, Installation Et Entretien

4.3

RECEIPT

In addition to the units, the packages contain accessories and
technical documentation for use and installation.
• Check that the following are present:
- User, Installation and Maintenance Manual
- Safety valve
- 6-core cable digital inputs
For the entire period in which the device remains inactive,
pending commissioning, it is advisable to place it in a place
protected from atmospheric agents and the environmental con-
ditions indicated in paragraph "6.1 STORAGE" on page 134.
130
EN
5. CONSTRUCTION
CHARACTERISTICS
5.1

COMPONENT IDENTIFICATION

REF. DESCRIPTION (fig. 20 - fig. 21 - fig. 22)
1 Heat pump
2 User interface
3 Steel casing
4 Electrical resistor
5 Magnesium anode
6
Ventilation air outlet (Ø 125 mm)
7 Ventilation air inlet (Ø 125 mm)
8 Cold water inlet connection
9
Hot water outlet connection
11 Condensate drain
Steel tank with vitreous enamel coating according to
14
DIN 4753-3
15
Condenser
16 Rotary compressor
17 Finned pack evaporator
18
Electronic fan
19 Boiler probes
21 Polyurethane insulation
23 Safety thermostat bulb tube
24 Power board
25 Wi-Fi card
Cover for accessing heating element, safety thermostat bulb,
26
boiler probes and power board
cod. 3541T580 - Rev. 06 - 04/2022
EGEA
90 LT - 120 LT
2
9
26
fig. 20
24
8
11