Safety Warnings - Ferroli EGEA 90 LT Manuel D'utilisation, Installation Et Entretien

SAFETY WARNINGS

Read carefully before installing
ATTENTION and using the device.
The manual must be kept for future
reference until dismantling.
OBLIGATION
The manual is provided in paper format; how-
ever, it is available in digital version, which
can be downloaded from the website www.
ferroli.com by selecting the purchased
product.
Any intervention on the device,
including
performed by qualified person-
ATTENTION
nel with a suitable Refrigeration
Technician's Licence aimed at
the knowledge and management
of systems containing HC type
R290
gases such as R290 (Propane).
The unit can be used by children
aged 8 years and over and by
persons with reduced physical,
sensory or mental capacities, or
lacking in experience or the nec-
essary knowledge, provided they
ATTENTION
are supervised or have received
instructions regarding safe use
of the unit and understand the re-
lated hazards.
Children must not play with the
device.
Cleaning and maintenance op-
erations, which can be carried
out by the user, must not be per-
ATTENTION
formed by children without su-
pervision.
106
EN
disposal, must be
cod. 3541T580 - Rev. 06 - 04/2022
EGEA
Before carrying out any type of
intervention on the device, the
personnel in charge of mainte-
nance must refer to what is re-
ported in this manual in the fol-
lowing chapters and in particular
to consult chapter "8. REQUIRE-
MENTS FOR THE OPERATION,
ATTENTION
SERVICE AND INSTALLATION OF
APPLIANCES THAT USE FLAM-
MABLE REFRIGERANT GASES
ACCORDING TO ANNEX DD OF
EN 60335-2-40" on page 149.
During the design and construc-
tion phase of the systems, local
rules and regulations must be
ATTENTION
complied with.
The air inlet and outlet of the ap-
pliance must be channelled to
R290 the external environment as in-
dicated in paragraph 6.6 on page
136.
For equipment installation oper-
ations, refer to par. "6.4 PREPA-
RATION OF THE INSTALLATION
ATTENTION
SITE" on page 135 and par. "6.5
WALL FIXING" on page 136.
For the correct operation of the
device, the inlet water pressure
must be:
ATTENTION
- maximum 0.7 MPa (7 bar);
- minimum 0.15 MPa (1.5 bar).
90 LT - 120 LT