Important; Cleaning The Water Tank; Troubleshooting Guide - TaoTronics TT-AH006 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Sleep Mode
Touch the Sleep Mode button to enter sleep mode. In sleep mode, the
humidifier will adjust output according to the surrounding humidity level
to keep the environment comfortable. The LED inside the water tank will
turn off. It will not make any beeping sound. In sleep mode, both
humidity level button and mist output button will stop working. Press the
Sleep Mode button again to exit sleep mode.
Control Lock
Touch to lock all other control buttons. This will prevent any button from
being pressed by accident. A white LED on the display screen indicates
the control is in lock mode. Touch the Control Lock button for 2 seconds
to turn off the lock mode.
Essential Oil Container
Put drops of essential oil in the essential oil container. Please do not put oil
directly into the water tank as it is corrosive and may cause internal damage.

Important

• Do not touch the water tank or any component while the unit is working.
• Do not exceed the max level when adding water.
• Stop using when the water level is low.
• Do not power on the humidifier when the water tank is not in place.
• Never add water hotter than 40°C / 104°F to avoid any possible
damage or malfunction of the device.
• Do not pour water through the mist nozzle. Wipe off any water outside
the body with a dry cloth.
• When the room temperature is 0°C / 32°F or below, please empty
water from the unit, as ice will damage the components.
• Do not place metals, chemicals, or detergents into the water to avoid
any possible damage or malfunction of the device.
• When the water tank is full, do not move it as the water might overflow
or flow into the body and cause damage.
• Do not add water through the nozzle directly under the tap.
• After each use, turn off the unit and unplug the power outlet.
• Do not pour water into the water tank when the power is on or when
the power adapter is plugged in.

Cleaning the Water Tank

Before cleaning, make sure the unit is turned off and the power plug is
unplugged.
• Cleaning the water tank regularly (recommended once every 2-3
weeks): Remove the water tank plug, wipe off any lime scale, and
rinse with clean water.
• Cleaning the base (recommended once a week): Wipe the base with a
soft cloth dipped with a mild cleaning agent and rinse off with clean water.
• Cleaning the humidifier: Rinse a soft cloth in warm water and wipe off
surface stains. You can rinse the nozzle under tap water directly.
• Storing the humidifier: When the unit has not been used for a long time,
clean and dry the unit and store it in a dry place in the original package.

Troubleshooting Guide

Problem
Causes
No power source
Power not turned on
No mist
Low water
coming out
The device is
getting too hot
Solutions
Connect power plug
Tap the Power Button to
turn on the humidifier
Add water into the
water tank
Power off and place in
a well ventilated place
for 10 minutes
07/08

Publicité

Table des Matières
loading

Table des Matières