Important; Cleaning The Water Tank; Troubleshooting Guide - TaoTronics TT-AH007 Mode D'emploi

Important

• Make sure water does not over ow when lling the water tank.
• Stop using when the water level is low.
• Do not power on the humidi er when the water tank is not in place.
• Never add water hotter than 40°C / 104°F to avoid any possible damage
or malfunction of the device.
• Do not pour the water through the mist outlet. Wipe off any water outside
the body with dry cloth.
• When the room temperature is 0°C / 32°F or below, please empty the
water from the unit. Ice can damage the components.
• Do not place metals, chemicals, or detergents into the water to avoid
any possible damage or malfunction of the device.
• When the water tank is full, do not move it as the water might over ow or
ow into the body and cause damage.
• After usage, turn the unit off and unplug it from the power outlet.
• Never pour out the water remaining in the water tank without the power
turned off and unplugged from the socket.

Cleaning the Water Tank

• Before cleaning, make sure that the unit is turned off and unplugged
from the power socket.
• Clean the water tank regularly (recommended once every 2-3 weeks) -
Remove the water tank cap, wipe off the lime scale in it and rinse off with
clean water.
• Cleaning the base (recommended once a week): Wipe the base with a
soft cloth dipped with a mild cleaning agent and rinse off with clean water.
• Cleaning the humidi er: Rinse a soft cloth in warm water and wipe off
surface stains. You can rinse the nozzle under tap water directly.
• Storing the humidi er: When the unit has not been used for a long time,
clean and dry the unit and store it in a dry place in the original package.
Caution
• Please do not dismantle the product by yourself, always ask a
professional electrician or authorized technician to repair.
• If you notice an unusual odor, please turn off the unit immediately.
• Please do not remove the power plug with wet hands as it may cause
electric shock.
• Do not place this unit on a slope or uneven surface to avoid water
leaking or component damage.
• Do not put this unit near any heat source or under direct sunlight.
• Keep away from other electric appliances that are prone to humidity
damage.
• Regularly clean the unit if it won't be used for a long period. Store in a
dry and shady place.
• Not a toy. Keep away from children.

Troubleshooting Guide

Problem Causes
No power
Misting not turned on
Not enough water in the tank
No mist coming out
The diffuser is getting too hot
The set RH is lower than
the ambient RH
Solutions
Connect power adapter
Tap the MAX / MIN to adjust
the mist output level
Add water into water tank
Power off and place in a well
ventilated place for
10 minutes
Tap the HUMIDITY Button to
increase the RH level
07/08