Product Diagram; Adding Water - TaoTronics TT-AH007 Mode D'emploi

Product Diagram

① Nozzle
②
Water Tank Lid
③ Water Tank
④
Filter
⑤ Water Inlet Cap
⑥
Cleaning Brush
⑦ Base
⑧ LED Display
⑨
Touchpad

Adding Water

• Remove the water tank lid, lift the water tank from the base, and turn it
upside down.
• Twist the tank cap counterclockwise to remove the cap and add clean
①
water into the tank. Make sure water does not over ow.
②
Note: Please rotate the cap gently; do not screw with too much force to
avoid hurting your hand or the product.
③
④
⑤
⑥
• Put the cap back on the tank and screw clockwise to lock in place. Stop
twisting when no water comes out.
⑦
• Put the water tank back on the base.
⑧
⑨
03/04