Product Diagram; Speci Cations; How To Use - TaoTronics TT-AH006 Mode D'emploi

Product Diagram

①
Nozzle
②
Water Tank
③
Water Tank Cap
④
Water Filter
⑤
Control Panel
⑥
Main Body
⑦
Air Filter
⑧
Essential Oil Container

Speci cations

Model
Working Voltage
Power Consumption
Water Tank Volume
Output Level
Working Time
Noise Level

How to Use

• Place the humidifier on a flat surface
• Lift the water tank and unscrew the water tank cap located at the
bottom of the tank
⑦
• Fill the water tank with clean water. Close the water tank cap and
⑧
place the water tank back onto the main body
• When the power adapter is connected, the humidifier will make a
beeping sound. The low water-level indicator may flash due to the
time needed for the water to fill the water chamber inside the main
body. Just wait until it stops flashing
• When the water runs out, low water-level protection will automatically
cut power to the main circuit and venting fan. Mist output will stop
and the low water-level indicator will start flashing
TT-AH006
AC 120V/60Hz (US/CA)
AC 230V/50Hz (UK)
Cool Mist：35W Max.
Warm Mist: 105W Max.
6L / 1.59 Gal
Level 1: 120±30mL/h
Level 2: 250±30mL/h
Level 3: 350±30mL/h
Level 1: 45 hours
Level 2: 20 hours
Level 3: 15 hours
≤38dB(A)
03/04