Control Panel - TaoTronics TT-AH006 Mode D'emploi

• To continue using the humidifier, unplug the power adapter and fill
the water tank with clean water. Drain out any residual water before
filling the water tank with clean water
Note: When moving the humidifier, please unplug the power plug and
move the entire unit together. Do not move the unit when it is working.

Control Panel

%
Power
Touch the power button to turn the unit on/off.
Mist Output
When the unit is powered on, touch the Mist Output button to cycle
through the 3 mist output levels.
Warm Mist
Touch the Warm Mist button and the humidifier will heat the mist
to 38°C / 101°F.
Note: It will take up to 30 minutes for the mist to warm up. Warm mist
can increase humidifying speed by 15- 20%, but it uses more power
than cool mist.
Timer
Touch the timer button to set an automatic timer between 1 to 9 hours.
Select CH to disable the timer. Once selected, the timer icon will flash
for 5 seconds to confirm.
Humidity Level
%
Touch the Humidity Level button to set the humidity level for the
environment. Once set, the humidity level icon will flash for 5 seconds to
confirm. The mist output will continue until the preset humidity level is
achieved. Select --% to turn off this function.
05/06