Technical Data - Hansgrohe Talis S 80 72017000 Mode D'emploi / Instructions De Montage

Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.

Technical Data

This mixer series-produced with EcoSmart
limiter)
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
The product is exclusively designed for drinking water!
4
English
Symbol description
® (flow
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
Assembly see page 6
Do not use silicone containing acetic acid!
Dimensions (see page 9)
Flow diagram
(see page 9)
®
with EcoSmart
without EcoSmart ®
Spare parts (see page 10)
Special accessories (order as an
extra)
seal #98996000
Operation (see page )
Hansgrohe recommends not to use as drink-
ing water the first half liter of water drawn
in the morning or after a prolonged period
of non-use.
Cleaning
see enclosed brochure
Test certificate (see page 11)