Enjoying Listening To A Source; Basic Listening Operations - Yamaha AV1 Mode D'emploi

ENJOYING LISTENING TO A SOURCE

BASIC LISTENING OPERATIONS

1
PUSH
PHONES
POWER MINI COMPONENT SYSTEM AV–1
TRACK PRESET
PRO LOGIC DSP OFF
ENHANCED MONO MOVIE
ROCK CONCERT VIDEO
DISCO HALL STADIUM
/
OPEN/CLOSE CD TUNER TAPE/MD
3
CENTER/REAR
/DELAY
C/R/D
6
a), d)
ON/OFF
TEST
SLEEP
POWER
1
MEMORY AUTO/MAN'L PRESET/BAND DISPLAY
VIDEO 2
TIME ADJ TIMER
/ / REPEAT
HOUR MIN
5
TIMER SLEEP
F REP AUTO ST
Hz MEMORY
K
MHz PTY HOLD
VCR VIDEO 1 VIDEO 2 VOLUME
2
PRESET
TUNER
CD
LEVEL
6
c)
PROGRAM
6
b)
DSP
SUBWOOFER
INPUT 3
VOLUME
AMP
5
2
When you have completed all connections and
adjustments before listening operations, begin listening
to a source on this system.
1
Press the POWER switch to turn the power on.
* When the power is on, the display on the main
control unit shows the name of currently selected
input source or other information.
2
Press the VOLUME "
OPEN/CLOSE
the volume to minimum until "MIN" is shown on the
display.
3
Select a source which you want to listen to or watch
by pressing the corresponding input selector button.
* The name of selected input source is shown on
the display.
4
Play the source.
To play a CD on the built-in CD player, see
pages 30 to 32.
To listen to a radio program on the built-in
tuner, see pages 33 to 37.
To play a source on an external audio/video
unit connected to this system, see page 44.
5
Press the VOLUME "
the volume.
* Volume level is shown on the display.
6
If you prefer, use the built-in digital sound field
processor including the Dolby Pro Logic Surround
decoder.
a) Press the DSP ON/OFF button so that a name of
DSP program appears on the display.
b) Select a desired program by pressing the
PROGRAM selector "
(See page 45 for descriptions about programs.)
c) According as you prefer, adjust the delay time,
the center speaker output level and/or the rear
speaker output level. (See pages 47 to 48 for
details.)
d) To switch off the digital sound field processor;
Press the DSP ON/OFF button.
* Sound output becomes 2-channel stereo.
E-28
" (or "–") button to decrease
" (or "+") button to increase
PRO LOGIC
or " button.
" "