Maintenance And Storage; Transportation And Handling - Dolmar PM-4810 Manuel D'instructions

Maintenance and storage

• Keep all nuts, bolts and screws tight to be sure the
equipment is in safe working condition;
• Never store the equipment with petrol in the tank
inside a building where fumes can reach an open
flame or spark;
• Allow the engine to cool before storing in any
enclosure; Clean and maintain the lawn mower before
storage;
• To reduce the fire hazard, keep the engine, silencer,
battery compartment and petrol storage area free of
grass, leaves, or excessive grease;
• Check the grass catcher frequently for wear or
deterioration;
• Replace worn or damaged parts for safety;
• If the fuel tank has to be drained, this should be done
outdoors;
• Improper maintenance,
replacement components,
modification of safety components can damage the
lawn mower and injure the operators seriously;
• Only use the recommended blades and spare parts by
the manufacturer. The use of non-genuine parts can
damage the machine and injure the operators. Keep
the lawn mower in good working condition;
• If the blade stopping device doesn't work, please
contact service center for help.

Transportation and handling

• Whenever the machine is to be handled, raised,
transported or tilted you must:
– Wear strong working gloves;
– Grasp the machine at the points that offer a safe
grip, taking account of the weight and its distribution;
– Use an appropriate number of people for the weight
of the machine and the characteristics of the vehicle
or the place where it has to be placed or collected.
• During transport, fasten the machine securely with
ropes chains.
WARNING:
• Do not touch rotating blade.
WARNING:
• Refuel in a well ventilated area with the engine
stopped.
10
use of non-conforming
or the removal or