Operation; System Configuration - L-Acoustics 8XTi Manuel D'utilisation

Masquer les pouces Voir aussi pour 8XTi:

Table des Matières

Les langues disponibles

7 7 7 7

OPERATION

7.1

The choice of a system configuration should be the result of an electro-acoustic study conducted by an expert (System

Engineer or Audio Consultant). However, this will not be discussed here as sound-design aspects are beyond the scope

of this manual. This study can rely on the simulations modeled in SOUNDVISION software, yielding electro-acoustic

predictions which take into account the enclosures' manufacturer data and particular situational usage, as well as the

projected environment.

Three operation modes ("FULL RANGE", "HIGH-PASS", and "LOW-EXTENSION"), each one associated with a set of

factory presets, will allow building all the common configurations (C, LR, LCR, distributed...).

The 8XTi enclosures can be used as a standalone system in the "FULL RANGE'' mode or in combination with

subwoofers in the "HIGH-PASS'' and "LOW-EXTENSION'' modes.

For each mode a distinction is drawn between ''FRONT'', ''FILL'', and ''MONITOR'' presets as they respectively

match front-of-house, distributed, and half-space loading applications.

• The LA4 / LA4X output channel assignment varies with the preset selected by the user.

• ALWAYS check that the 8XTi enclosures are connected to correct LA4 / LA4X output channels

before operating.

CAUTION

Note: The latest version of the preset library can be supplied by an L-ACOUSTICS

also downloadable from the L-ACOUSTICS

8XTI_UM_ML_1-1

web site at www.l-acoustics.com.

w w w . l - a c o u s t i c s . c o m

authorized representative and is

11 en

Table des Matières

Table des Matières