dirna Bergstrom bycool green line COMPACT 3.0 Instructions De Montage page 27

COMPACT 3.0
11 Fit the internal air distribution panel on the front
hexagons with wide-flange H-H hexagon (1) and
M6 nut (1) on each stud. Tighten hexagon until
the internal air distribution panel duct reaches
the top foam rubber on the device.
Important: The internal air distribution panel
duct must reach the top foam rubber on the
device to prevent air leaks.
11
EPDM
seal
M-M Hexagon
Cabin roof
Upholstery
12
Position the console and align the equipment in
the most convenient location in the cabin roof.
Once aligned, remove the console.
Note: Use the curtain rail as a reference.
Compact Base
F-F Hexagon
11
Interior air distribution panel
27
EN
®
Foam
12