dirna Bergstrom bycool green line COMPACT 3.0 Instructions De Montage page 23

Masquer les pouces Voir aussi pour bycool green line COMPACT 3.0:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

COMPACT 3.0
HOW TO CUT EPDM GASKET TO AVOID
!
WATER FILTRATION INTO THE CABIN
A- Glue gasket, keeping 100 mm of protection
paper at each side.
B- Remove the two pieces of paper.
C- Glue by pressing both ends.
B
Gasket
4
OUTSIDE CABIN:
Position Compact in sun hatch hole.
Caution! When positioning the unit above the
hatch gap, check that the wastewater run-offs
are not blocked by the EPDM seal.
Gasket
Remove
A
Gasket
100 mm Approx. (protection paper)
C
Gasket
23
EN
®
15 mm
Gasket
Cabin roof
Gasket
4
Sun hatch

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bycool compact 3.0

Table des Matières