AEG FSE62800P Mode D'emploi page 34

Masquer les pouces Voir aussi pour FSE62800P:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

34
www.aeg.com
German de-
grees (°dH)
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
Whether you use a standard detergent
or multi-tabs (with or without salt), set
the proper water hardness level to
keep the salt refill indicator active.
Multi-tabs containing salt
are not effective enough to
soften hard water.
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
flash and the display is blank.
2. Press
• The indicators
are off.
• The indicator
• The display shows the current
setting: e.g.
3. Press
setting.
4. Press the on/off button to confirm
the setting.
6.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
You can set the released quantity of rinse
aid between level 1 (minimum quantity)
and level 6 (maximum quantity). Level 0
French degrees
(°fH)
19 - 25
7 - 18
<7
and
,
,
,
.
,
,
still flashes.
= level 5.
repeatedly to change the
mmol/l
Clarke de-
1.9 - 2.5
0.7 - 1.8
<0.7
will deactivate the rinse aid dispenser
and no rinse aid will be released.
Factory setting: level 4.
How to set the rinse aid level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
start flashing and the display is
blank.
2. Press
until
• The indicators
and
are off.
• The indicator
flash.
• The display shows the current
and
setting: e.g.
– The levels of rinse aid range
3. Press
setting.
4. Press on/off to confirm the setting.
6.4 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the
rinse aid indicator is turned on notifying
to refill rinse aid. If you are using multi-
tabs containing rinse aid and you are
Water softener lev-
grees
el
13 - 17
5 - 12
< 5
1
and
,
,
,
.
,
,
continues to
= level 4.
from 0A to 6A where level 0A
means rinse aid is not used.
repeatedly to change the
3
2
2)
until
and
and

Publicité

Table des Matières
loading

Table des Matières