Vortice VORT INVISIBLE MINI Notice D'emploi Et D'entretien page 45

ENGLISH
• "Int' Value of the indoor air temperature (Example: Ext
+22°C) after pushing the button [II].
• "Progr." if weekly programming is active, after the key is
5
pressed [I].
• The message "Man." will appear if during weekly
programming the user manually varies the speed.
• "Exh" value of the exhaust air temperature (for example
Exh + 18°C) after the key is pressed [II].
6
• Date (for example 03/04/2017),after the key is pressed
.
[I]
• Time of day (i.e. 12:30), after the key is pressed [I].
• "Sup" value of the supply air temperature after the key
7
is pressed [II]
• HR % show the set value of the hr, turns black when
the value treshhold has been exceeded.
Some examples of the HOME screen are shown below.
MIN
Ext + 5°C
Exh + 18°C
Equipment start-up/shut-down
To start the equipment: Connect the machine to the main power supply.
CAUTION: It is possible to turn completely off the machine only by disconnecting it from the mains.
Operating mode selection
To change the operating mode: press the [ ▲] or [ ▼] key from the "HOME" page until one of the following
texts below appears: "MIN", "MAX" . Each text displayed corresponds to a different fan speed and thus a
different flow rate.
MIN
Ext + 5°C
Exh + 18°C
CAUTION: The minimum "MIN" speed does not correspond to the machine stop.
MAX
Int + 18°C
04/06/19
Sup+ 18°C
Int + 18°C
Sup+ 18°C
MAX
Man
08:31
MAX
Man
04/06/19 08:31
HR% 70
45